Gen 3 Hemi Lifter Trays

Gen 3 Hemi Lifter Trays

AAD Performance

$325.00 

Machined billet aluminum lifter trays for your Gen 3 hemi, help to protect against lifter rotation at high rpm that can be caused by factory plastic lifter trays. 

The "Factory Mopar / Johnson Short & Standard Travel" version is for factory lifters and Johnson Lifters that measure .728-.729" between the flats.

 

The "Johnson Hy-Lift" version is for lifters that measure .722-.723" between the flats.

 

Check your lifter travel for binding before starting engine, lifter may not "bottom out" in the lifter tray outside engine, as the lifter shouldn't get all the way to touch the top side of the tray in operation.  Trays should accommodate .400"+ lift at cam, depending on base circle dimensions.

 

Racing part, no implied engine warranty with these parts.

These are not available through distribution

 

 

If you are not qualified to be inside an engine and don't understand things such as that mds lifters are absolutely not the same dimensions as non-mds lifters, please do not purchase these parts.  Thank you,

 

Also, if you are building a stock 5.7 truck motor on a stock cam and stock lifters, all reused-used parts.  For god's sake, please leave this page.

Customer Reviews

Based on 1 review Write a review